VALEO BEEP&PARK KIT NO.6 632015 REAR SENSORS AND SCREEN

VALEO BEEP&PARK KIT NO.6 632015 REAR SENSORS AND SCREEN

VALEO Parking Sensor Kit 6 632015 Valeo Beep & Park Parking sensor makes parking easy. As soon as you engage reverse gear, the 4 sensors detect the presence of obstacles behind the vehicle. Beep & park system then sends an audible alert which intensifies as you appochez the obstacle, guiding you in your operation. The beep becomes continuous within the obstacle 30cm.

Functionalities:

Detection sensors
• Depending on the kit, the system features 4 or 8 ultrasonic sensors
front and/or rear) for consistent detection.
• The front and/or rear sensors are activated as soon as the reverse gear
is engaged.
• When the vehicle starts, the front sensors are activated, then stop after
30 seconds once the vehicle is underway, so as to avoid any false alerts.
Sound alarm
• The audible alarm gradually intensifies. It is intermittent at first and
becomes continuous when the vehicle is within 30 cm of the obstacle(1).
• The system detects obstacles located between 10 cm and 1.80 m from
the vehicle.
Visual alarm (depending on the kit)
• The distance from the obstacle and its precise position are shown on the
control screen positioned above the rearview mirror or on the dash.
A diagnostic function
• The system automatically detects defective or badly fixed sensors
• In kits no.1 and no.4, the speaker warns the driver when a sensor
is malfunctioning.
• In kits no.2, no.3, no.5 and no.6, the screen warns the driver and identifies the defective sensor.

Kit content:

Buzzer or control screen
Electronic control unit
Ultrasonic sensors
Angle adjustors (6°, 10°, 13°)
Wiring
Installation accessories
Fitting instructions

Specification:

Part number: 632015
Compatibility: all types of vehicles
Rated voltage: 12 V
Power supply voltage: from 9 to 16 V
Working current: < 300 mA except kit no.4 <150 mA,
kit no.5 <400 mA
Beep volume: from 70 to 90 dB
Detecting range (rear): from 0.1 to 1.5 m
Detecting range (front): from 0.1 to 0.9 m
Operating temperature: from -40 °C to 85 °C / from -40 °C to 185 °F
Homologation(s): E-mark, CE, Rohs