VALEO BEEP&PARK KIT NO.4 632003 FRONT SENSOR AND BUZZER

VALEO BEEP&PARK KIT NO.4 632003 FRONT SENSOR AND BUZZER

VALEO Parking Sensor Kit 4 632003. Valeo Beep & Park Parking sensor makes parking easy. The Beep & Park system from Valeo consists of 4 ultrasonic sensors (front and / or back) for a homogeneous detection area especially on the sides of the bumper. The rear sensors are activated when reverse gear is engaged. The front sensors are activated for 30 seconds when starting the vehicle and also when engaging reverse gear. Any obstacle to the front or rear of the vehicle is detected and its vicinity is indicated to the driver with an acoustic signal.

Functionalities:

Detection sensors
• Depending on the kit, the system features 4 or 8 ultrasonic sensors
front and/or rear) for consistent detection.
• The front and/or rear sensors are activated as soon as the reverse gear
is engaged.
• When the vehicle starts, the front sensors are activated, then stop after
30 seconds once the vehicle is underway, so as to avoid any false alerts.
Sound alarm
• The audible alarm gradually intensifies. It is intermittent at first and
becomes continuous when the vehicle is within 30 cm of the obstacle(1).
• The system detects obstacles located between 10 cm and 1.80 m from
the vehicle.
Visual alarm (depending on the kit)
• The distance from the obstacle and its precise position are shown on the
control screen positioned above the rearview mirror or on the dash.
A diagnostic function
• The system automatically detects defective or badly fixed sensors
• In kits no.1 and no.4, the speaker warns the driver when a sensor
is malfunctioning.
• In kits no.2, no.3, no.5 and no.6, the screen warns the driver and identifies the defective sensor.

Kit content:

Buzzer or control screen
Electronic control unit
Ultrasonic sensors
Angle adjustors (6°, 10°, 13°)
Wiring
Installation accessories
Fitting instructions

Specification:

Part number: 632003
Compatibility: all types of vehicles
Rated voltage: 12 V
Power supply voltage: from 9 to 16 V
Working current: < 300 mA except kit no.4 <150 mA,
kit no.5 <400 mA
Beep volume: from 70 to 90 dB
Detecting range (rear): from 0.1 to 1.5 m
Detecting range (front): from 0.1 to 0.9 m
Operating temperature: from -40 °C to 85 °C / from -40 °C to 185 °F
Homologation(s): E-mark, CE, Rohs